Second coat & damp-proofing

Xypex Modified

Xypex Modified can be applied as a second coat to reinforce Xypex Concentrate, or applied by itself to damp-proof the exterior of foundation walls. Applied as a second coat, Xypex Modified chemically reinforces Xypex Concentrate where two coats are required and produces a harder finish. Where damp-proofing is required, a single coat of Modified may be used as an alternative to a spray/tar emulsion. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials.

Recommended for

  • Single-coat damp-proofing of foundations
  • Reservoirs (as a second coat with Concentrate)
  • Sewage and water treatment plants
  • Secondary containment structures
  • Tunnels and subway systems
  • Underground vaults
  • Parking structures
  • Swimming pools

Advantages

  • Resists extreme hydrostatic pressure
  • Becomes an integral part of the substrate
  • Can seal static hairline cracks up to 0.4 mm
  • Can be applied to the positive or the negative side of the concrete surface
  • Allows concrete to breathe
  • Highly resistant to aggressive chemicals
  • Non-toxic, no VOCs
  • Does not require a dry surface
  • No costly surface priming or levelling before application
  • Not subject to deterioration; permanent

Specifications

Packaging60 lb (27.2 kg) pails; 50 lb (22.7 kg) bags
Coverage per coat0.65–0.8 kg/m²
StorageDry, minimum 7 °C; shelf life one year
PDFXypex Modified product dataData sheet · PDF

Work with a group that has been building since 1909.

Contact the corporate office